Serving the Killeen area  ·  (254) 213-5004  ·  Open Mon-Sun 7am-7pm
📞 (254) 213-5004 Free Quote

Metal Roofing in Florence, TX (76527) · Local Professionals

Killeen Metal Roofing · Fast response in Florence and the Killeen area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+258Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Florence, Texas is a small farm town where the blackland prairie rolls west toward the Hill Country, and most of the roofs here sit on ranch-style homes, barns, and shops that have seen decades of Texas sun and spring hail. If you live off Main Street or out on a county road near Florence High School, you know the wind comes across open fields and the afternoon sun hits hard from the west.

That is why homeowners and property managers in Florence (76527) call Killeen Metal Roofing. We are just up the road in Killeen, we know the local building stock from the older farmhouses near the city park to the newer places going up toward Jarrell, and we show up ready to talk straight about metal roofing.

Metal Roofing in Florence (76527)

Florence sits on the edge of the Edwards Plateau, where limestone shelves show up in backyards and the soil shifts from blackland clay to thin rocky ground. That matters for metal roofing because expansive clay and shallow limestone affect how we anchor panels and flashing. On older farmhouses and barns around Florence, we often find decking that has moved or fasteners that have backed out after years of heat cycling. We also deal with tight access on smaller in-town lots and long gravel drives on rural properties, so we plan deliveries and staging around what your place actually looks like. And because so many properties here are agricultural, we regularly work on shops, equipment barns, and hay sheds where corrugated and R-panel roofing makes practical sense.

Our team has been serving Florence and the surrounding Killeen area long enough to know which roof profiles hold up to the spring storms that roll through Bell County and which ones are a waste of money on a low-slope barn. We are fully insured with general liability and workers' compensation, and we treat every property like it is our own.

Our services in Florence

How a Job Works in Florence

Step 1: You call (254) 213-5004 or reach out online, and we set up a free on-site assessment. We walk the roof, check the decking, flashing, and fasteners, and talk through whether repair, replacement, or a retrofit over existing shingles makes sense for your place in Florence.

Step 2: Once you approve the scope and price, we pull the required roofing permit through the local building department and schedule the work. On rural properties we coordinate delivery around gate access and livestock, and on in-town jobs we keep the crew and materials contained so neighbors are not dealing with a mess.

Step 3: We clean up every day and do a final walkthrough with you, checking that gutters, flashing, and penetrations are sealed and that the site is clear. We do not leave until you are satisfied with the work.

Pricing for metal roofing in Florence depends on the size and pitch of your roof, the condition of the decking, access, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs start around $9 per linear foot. For a free estimate on your Florence property, call (254) 213-5004.

My barn off County Road 241 has corrugated panels that are rusting through at the fasteners. Can you match the existing profile?
Yes. We stock and source common corrugated and ribbed panel profiles, and we can often match the existing coverage and color closely enough that a repair blends in. If the barn is older, we will check the purlins and framing before we quote so you are not putting new panels on bad structure.
A storm just peeled back panels on my roof near Florence High School. How fast can you get out?
We prioritize active leaks and storm damage in Florence and the surrounding area. Call (254) 213-5004, and we will schedule an inspection as soon as possible, often the same day or next. We can tarp or secure the roof to prevent further water damage while we prepare a repair plan.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Florence?
For a single-story ranch around that size, most replacements fall in the range of $9 to $14 per square foot installed, depending on panel type, decking condition, and how many penetrations need flashing. Standing seam runs higher than corrugated or R-panel. We give you a written estimate after walking the roof.
Do I need a permit to replace my roof in Florence, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Florence, and the rules vary by jurisdiction. We confirm the current requirements with the local building department before work starts and handle the permit application as part of the job so you are not chasing paperwork.
My neighbor says my new metal roof panels overhang the property line. What should I do?
Property line issues are best resolved before installation. We set the roof layout based on your survey and keep overhangs within your property. If you are in an HOA, we also check the design guidelines for panel profile and color before ordering materials so there are no surprises after the fact.
Are you insured for work on my property in Florence?
Yes. We are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in Florence between hail seasons?
Check the fasteners and seals once a year, especially after spring storms, and keep gutters clear of live oak leaves and debris. Look for loose panels or lifted edges after high winds. A quick inspection in the fall can catch small issues before the next hail season, and we offer free estimates for inspections.
Why choose us?

Trusted professionals in Killeen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Killeen

All your work handled by qualified professionals in Killeen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

258+ Verified Client Reviews in Killeen

⭐⭐⭐⭐⭐ 4.9/5 · 258 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Killeen · Response within 24h · No commitment · ☎ (254) 213-5004

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Killeen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm