Serving the Killeen area  ·  (254) 213-5004  ·  Open Mon-Sun 7am-7pm
📞 (254) 213-5004 Free Quote

Metal Roofing in Kempner, TX (76539) · Local Professionals

Killeen Metal Roofing · Fast response in Kempner and the Killeen area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+258Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kempner is the kind of place where a metal roof just makes sense. Lots are bigger out here on the Lampasas County line, ranch houses and farm shops sit back off the road, and the sun and hail do not let up. If you are in 76539 and your shingles are getting tired, you are probably already thinking about metal.

We are Killeen Metal Roofing, based just up the road in Killeen, and we work Kempner and the surrounding rural stretches all the time. Whether you are off FM 2657 near the school or out toward Oakalla on acreage, we know how to handle the wind, the sun, and the wide-open exposure that comes with property out this way.

Metal Roofing in Kempner (76539)

Kempner sits right where the Hill Country starts to roll, and that changes how a roof job goes. You have got ranch homes and farmhouses on larger lots, plenty of barns, shops, and carports, and a lot of properties with long gravel drives and gate access. The ground here is shallow limestone and clay, which means drainage matters and so does how we stage materials. We are not backing a trailer into a tight subdivision cul-de-sac. We are planning for wide gates, overhead lines, and the occasional grade change that makes a simple delivery a little more interesting.

The sun out here is brutal on asphalt shingles, and spring hail and straight-line wind are the two things that send people looking for something tougher. That is why we see so much interest in corrugated and ribbed panel roofing for barns and shops, and metal roof coating and painting for older ranch roofs that are still solid but faded and chalky. We have been doing this across Bell and Lampasas County long enough to know what holds up and what does not. Our team handles everything from a small leak repair to a full standing seam install, and we are fully insured with general liability and workers' compensation.

Our services in Kempner

How a Job Works in Kempner

It starts with a call to (254) 213-5004 or a request through our site. We set up a free on-site assessment at your Kempner property, and we actually walk the roof. We check fasteners, seams, flashing, and the condition of the decking underneath. If you have a shop or barn, we look at that too. You get a straight answer and a written estimate, no pressure.

When we schedule the work, we plan around your access. Out here that might mean coordinating a delivery around a narrow gate or making sure we do not block a working ranch road during the day. If your property is inside a subdivision with an HOA, we help you get the panel profile and color approved before we order anything. For full replacements, we pull the roofing permit through the local building department and keep the inspection schedule on track.

When we are done, we clean up. That means magnets over the yard and driveway for screws and metal shavings, and a final walkthrough with you so you can see the finished roof and ask questions. We do not leave a mess behind, and we do not disappear after the invoice is paid.

Pricing in Kempner depends on the size of the roof, the pitch, how many layers are coming off, and how easy it is to get materials to the house. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof over existing shingles (retrofit) starts at $7 per square foot, and a full replacement starts at $9 per square foot. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and coating and painting starts at $2.50 per square foot. Flashing and chimney repair starts at $600. These are starting figures, not a quote. The only way to know what your Kempner roof will actually cost is to have us look at it. Call (254) 213-5004 for a free estimate.

Do you work on ranch shops and barns out toward Oakalla and the Lampasas County line?
Yes, we do a lot of that. Corrugated and ribbed panel roofing is the standard for barns, shops, and carports in this area, and we install it, repair it, and re-fasten it. We are set up for properties with long drives, wide gates, and overhead lines, so access is not a problem.
How fast can you get out after a storm knocks panels loose in Kempner?
We treat wind-lifted panels and active leaks as priorities. Call (254) 213-5004 and we will get an inspection on the schedule as quickly as we can. We can often tarp or secure a roof temporarily while we wait on materials or an insurance decision.
What does a metal roof cost for a typical Kempner ranch house?
It depends on square footage, pitch, and whether we are going over existing shingles or tearing off. A retrofit over shingles starts around $7 per square foot, and a full replacement starts around $9 per square foot. We give you a written estimate after we see the roof, and there is no charge for that visit.
Do I need a permit for a metal roof in Kempner?
Roofing permits are commonly required for a full replacement or re-roof, and the rules and fees vary by jurisdiction. We handle the permit through the local building department for you and make sure the inspection schedule is followed. We always defer to the local building department on the specifics because the requirements can change.
What if my Kempner HOA has rules about metal roof color or panel style?
We help you get the panel profile and color approved before we order materials. Send us your HOA guidelines or design review form, and we will make sure the submittal matches what they want. It saves everyone a headache later.
Are you insured for work on my Kempner property?
Yes. We carry general liability and workers' compensation insurance. If you would like a certificate of insurance before we start, just ask and we will send it over.
What kind of maintenance does a metal roof need in this climate?
The main thing is checking fasteners and seams once a year, especially after hail season. Screws can back out over time, and that is when leaks start. We offer inspections and screw replacement and re-fastening. A coating every several years helps older panels stay cool and last longer in this sun.
Why choose us?

Trusted professionals in Killeen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Killeen

All your work handled by qualified professionals in Killeen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

258+ Verified Client Reviews in Killeen

⭐⭐⭐⭐⭐ 4.9/5 · 258 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Killeen · Response within 24h · No commitment · ☎ (254) 213-5004

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Killeen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm