Serving the Killeen area  ·  (254) 213-5004  ·  Open Mon-Sun 7am-7pm
📞 (254) 213-5004 Free Quote

Metal Roofing in Lampasas, TX (76550) · Local Professionals

Killeen Metal Roofing · Fast response in Lampasas and the Killeen area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+258Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lampasas is a town where historic limestone storefronts around the courthouse square sit a few blocks from ranch lots with metal barns and older frame homes. The housing stock is a mix of early 1900s bungalows, mid-century brick ranches, and newer builds on the edges of town, and the lots are often long and narrow or wide enough for a shop and a corral.

Homeowners in Lampasas (76550) call Killeen Metal Roofing because we understand that mix. We have replaced shingle roofs on Sulphur Creek Drive and repaired corrugated panels on ranch buildings out toward Kempner and Adamsville. If you are near the Lampasas County Courthouse or out on a county road, we can give you a straight answer on metal roofing.

Metal Roofing in Lampasas (76550)

Lampasas sits where the Hill Country starts to rise, with limestone underfoot and clay that holds water after a storm. That means drainage matters. On older homes near downtown, we often find that the original gutters are undersized for the metal roof we are installing, and we recommend upgrading to handle the sudden downpours. On ranch properties, the challenge is often access: long gravel drives, tight gates, and barns that need a panel roof that can handle wind and sun without constant maintenance. We also see a lot of historic homes where the roof profile and color need to match the neighborhood character, and we help you pick a panel that fits without looking out of place.

Our team has worked across Lampasas County and the Killeen area for years. We know which suppliers can deliver standing seam panels quickly and which local inspectors want to see specific flashing details. Whether it is a small repair on a metal roof over shingles or a full replacement on a commercial building near the square, we handle it.

Our services in Lampasas

How a Job Works in Lampasas

Step 1: You call us at (254) 213-5004 or request a free estimate online. We schedule a time to come out and look at your roof, whether you are in town or on a rural lot. We inspect the current roof, check the decking and flashing, and talk with you about what you want. You get a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we pull the permit if one is required by the City of Lampasas or the county. We order materials and schedule the work. On older homes with tight lot access, we plan where to stage materials and how to get panels to the roof without damaging landscaping. If your home is in a historic district or an HOA, we coordinate any design review before we order. We keep you informed on timing and any surprises we find once we start tearing off.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old roofing, and do a final walkthrough with you to make sure you are satisfied. We do not leave until you have seen the finished work and know how to care for your new metal roof.

Pricing for metal roofing in Lampasas depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and metal roof over shingles from $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is often a good fit for barns and shops. Coating and painting start at $2.50 per square foot. For a free estimate on your specific property, call us at (254) 213-5004. We will give you a realistic number and explain what drives the cost.

My house is near the Lampasas County Courthouse and has an older roof. Can you match the look of the neighborhood with a metal roof?
Yes. We work with panel profiles and colors that suit older homes. For historic areas, we can suggest a standing seam or metal shingle that resembles traditional roofing while giving you the durability of metal. We will also check if your property is in a historic district and help with any design review.
A storm just blew through Lampasas and lifted some panels on my barn. How fast can you respond?
We offer free inspections for storm and wind damage. Call us at (254) 213-5004, and we will schedule a visit as soon as possible. We can tarp or secure the roof temporarily if needed and give you a repair estimate. We serve all of Lampasas County.
What does a typical metal roof repair cost in Lampasas?
Most repairs start around $450, but the final cost depends on the extent of damage, access, and materials. Leak repairs, flashing fixes, and screw replacement are common. We provide a written estimate before any work begins.
Do I need a permit to replace my roof in Lampasas?
Roofing permits are often required for a full replacement, and rules vary between the City of Lampasas and the county. We handle the permit process for you and make sure the work meets local code. We will verify requirements with the local building department before starting.
My neighbor and I share a property line, and I want a metal roof that might affect drainage. What should I do?
We can review your property lines and drainage plan to make sure the new roof does not cause water to flow onto your neighbor's property. If you are in an HOA, we can also help you get approval for the roof style and color before installation.
Are you fully insured for work on my Lampasas property?
Yes. We carry general liability insurance and workers' compensation coverage.
How often should I have my metal roof inspected in Lampasas?
We recommend an inspection every two to three years, especially after hail season or high winds. Lampasas gets strong sun and occasional storms, so checking fasteners, seals, and flashing can prevent small issues from becoming leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Killeen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Killeen

All your work handled by qualified professionals in Killeen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

258+ Verified Client Reviews in Killeen

⭐⭐⭐⭐⭐ 4.9/5 · 258 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Killeen · Response within 24h · No commitment · ☎ (254) 213-5004

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Killeen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm